Town & Country V6-3.8L (2009)
Yaw Rate Sensor: Service and Repair
Dynamics Sensor - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable from its battery post.
2. Remove the instrument panel center stack console. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bin - Removal
3. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle for access to components. See: Body and
Frame/Interior Moulding / Trim/Carpet/Service and Repair/Carpet - Removal
4. Remove the fasteners (2), then instrument panel center support brackets (2). There is one bracket on each side of tunnel structure.