Town & Country V6-3.8L (2009)
Cross-Member: Service and Repair
Crossmember - Installation
Front Fore and Aft
INSTALLATION
1. Install front engine mount (1) on crossmember (3). Install mounting bolts (1) and tighten to 55 Nm (41 ft. lbs.).
2. Position fore-aft crossmember in engine compartment and install mounting bolts (3, 4, 6). Tighten forward mounting bolt (6) to 113 Nm (83 ft.
lbs.). Tighten rearward mounting bolts (3, 4) at suspension crossmember (2) to 55 Nm (41 ft. lbs.).