Town & Country V6-3.8L VIN L (2006)
Sensor/Transmitter 3 = Right Rear
Sensor/Transmitter 4 = Left Rear
NOTE:
1. If one or all Sensor/Transmitters cannot be trained, check for and avoid RF interference.
2. If one Sensor/Transmitter still cannot be trained, replace it and retry.
3. If all Sensor/Transmitters still fail to train, replace the SKREEM.
PRESSURE THRESHOLDS
The SKREEM will monitor the tire pressure signals from the Sensor/Transmitters and determine if any tire has gone below the low-pressure or
above the high-pressure thresholds. Refer to the tables below:
Low Tire Pressure Thresholds
High Tire Pressure Thresholds
*Tolerance ±6.9 kPa (1 PSI)
ACTIVE FAULT AND SYSTEM ALERTS
An active fault will be triggered when a system failure has been detected. When this occurs, the Instrument Cluster will illuminate the TPMS
indicator and the SKREEM will store the fault code. An alert will be triggered when a tire pressure has gone below or above the set threshold
pressure. When this occurs, the Instrument Cluster will flash the TPMS indicator. The SKREEM will request a secondary message to be displayed
on the EVIC (if equipped). Only when a tire pressure has gone below the set threshold pressure will the SKREEM request the TPMS indicator to
flash and display the EVIC message (if equipped). When a high pressure alert occurs, only the EVIC message will be displayed. This action will
be displayed as long as the alert condition is active.