Town & Country V6-3.8L VIN L (2006)
INSTALLATION
1. Carefully position the lower sliding door track in the vehicle.
Lower Track Retaining Nuts
2. Install the lower track retaining nuts and install the sealing patches. Torque the nuts to 8 Nm (70 in. lbs).
3. Install the lower hinge assembly on the door.
NOTE: Take care to locate the lower hinge assembly on the door in its original position (ie. match screw washer with rings left on hinge). Adjust
door fit if required.
4. Remove the floor jack.
5. Install the hold-open striker.
6. Install the side door sill plate.
7. Connect the battery negative cable.