Town & Country V6-3.8L VIN L (2006)
Pinch Sensor Location
4. Install wire harness grommet in liftgate flange and route, connect the pinch sensor wire harness connector.
5. Remove protective tape from the top of the pinch sensor. Firmly apply pressure to the sensor adhesive to secure it to the liftgate.
6. Install the trim panel on the liftgate.
7. Connect the battery negative cable.
8. Using an appropriate scan tool, check and erase any power liftgate control module diagnostic trouble codes related to the pinch sensor.
9. Verify power liftgate system and pinch sensor operation. Cycle the power liftgate through one complete open and close cycle, during the final
close cycle press the pinch sensor to verify the power liftgate detects an obstruction and returns to the full open position.