Town & Country V6-3.8L VIN L (2006)
Front Cross-Member: Removal and Replacement
REMOVAL
The front cradle crossmember must be installed in the design location to achieve proper front end suspension alignment. If the cradle crossmember is
removed without applying reference marks on the frame rails, align the cradle crossmember according to the dimensions provided in this group.
Fig. 20
NOTE: If the caged nuts in the frame rails become damaged and cannot be reused, a replacement nut can be obtained through Mopar(R) (Fig. 20).
1. Disconnect battery negative cable.
2. Remove steering column lower cover from instrument panel.
3. Remove steering column cover backing plate. Refer to Knee Diverter.
4. Position steering so front wheels are straight ahead.
CAUTION: Do not rotate steering wheel after disengaging lower coupling from steering gear, damage to air bag clock spring can result.
Fig. 21
5. Remove clinch bolt attaching steering column coupling to steering gear shaft (Fig. 21).