chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Interior - Load Floor Locking Mechanism Won't Hold|Page 6992 > < Interior - Load Floor Locking Mechanism Won't Hold|Page 6986
Page 1
background image

Accessory Compartment: All Technical Service Bulletins
Interior - Load Floor Locking Mechanism Won't Hold

NUMBER: 23-045-05

GROUP: Body

DATE: September 23, 2005

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. DO NOT ORDER PARTS OR PERFORM ANY ACTIONS RELATED TO THIS
BULLETIN UNTIL OCTOBER 3, 2005.

SUBJECT:
Load Floor Door Hinge Locking Mechanism May Not Hold

OVERVIEW:
This bulletin involves replacing both middle load floor doors.

MODELS:

2006

RS

Town & Country/Caravan

NOTE:

This bulletin applies to vehicles equipped with Stow N Go seating (sales codes CYC, CYV, or CYY) built on or before August 12, 2005 (MDH
0812XX).

SYMPTOM/CONDITION:

The load floor door hinge locking mechanism may not hold when opening the load floor door.

DIAGNOSIS:

1.

Position both the left and right front seats in the full forward position.

2.

Stow the left and right second row seats into the floor.

3.

Close the load floor door.

4.

Push the load floor door lock knob inward (locked position). Open and close the load floor door five times (Fig. 1).

5.

Does the load floor door lock knob disengage?

Interior - Load Floor Locking Mechanism Won't Hold|Page 6992 > < Interior - Load Floor Locking Mechanism Won't Hold|Page 6986