Town & Country V6-3.8L VIN L (2006)
Sliding Door Hold-Open Latch: Procedures
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the appropriate side door trim panel.
3. Remove the weather shield if necessary.
Removing Latch Retaining Bolts
4. Open the side door all the way and remove the door latch retaining bolts.
Power Latch Position And Orientation
5. Partially close the door and pull the latch assembly out of the side door inner panel.
6. Disconnect all electrical connectors leading to the latch assembly.
7. Disconnect the inside and outside handle cables from the latch assembly.