Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-2591003.png)
Heated Seat Wire Harness Routing - Late Build Vehicles
2. Connect the new heating element electrical connectors. Passenger seat shown, driver seat similar.
3. Connect the battery negative cable.
4. Verify heated seat system operation.
5. Install the appropriate seat cushion or seat back trim cover.
NOTE: Make certain the seat wire harness is correctly routed through the seat and seat back. The excess wire between the cushion and back
elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of the trim cover.