Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-1507001.png)
Brake Pedal Assy: Service and Repair
PEDAL TORQUE SHAFT - RHD
REMOVAL
1. Remove the instrument panel.
2. Remove the HVAC housing.
3. Remove the retaining clip at the torque shaft end of the brake pedal-to-torque shaft link. Remove the link from the torque shaft. Discard the
retaining clip. It is not to be reused. Replace with a new clip when reassembled.
Fig. 62 POWER BRAKE BOOSTER BRACKET
4. Locate the booster input rod-to-brake pedal torque shaft connection and remove the retaining clip (Fig. 62). Discard the retaining clip. It is not to
be reused. Replace with a new clip when reassembled.
Fig. 63 BOOSTER, TORQUE SHAFT AND PEDAL MOUNTING