Town & Country V6-3.8L VIN L (2006)
Figure 1
3. Remove the disc brake caliper to adapter guide pin bolts as shown in figure 1.
Figure 2
4. Remove rear caliper from adapter using the following procedure. First rotate front of caliper up from the adapter. Then pull the rear of the caliper
and the outboard brake shoe anti-rattle clip out from under the rear abutment on the adapter as shown in figure 2.
Figure 3
5. Support caliper to prevent the weight of the caliper from damaging the flexible brake hose as shown in figure 3.
6. Remove the retainer clips from the wheel mounting studs, then pull the rotor straight off the studs.