Town & Country V6-3.8L VIN L (2006)
15. Adjust rear brake shoes.
16. Install the wheel and tire assembly.
17. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification. Then repeat the tightening sequence to the
full specified torque of 135 Nm (100 ft. lbs.).
18. Lower the vehicle.
19. Push the parking brake lever (pedal) to the floor once and release pedal. This will automatically remove the slack from and correctly adjust the
parking brake cables.
20. Road test vehicle. The automatic adjuster will continue the brake adjustment during the road test of the vehicle.