Town & Country V6-3.8L VIN L (2006)
Fig. 34 Installing Piston Into Caliper Bore
4. Install piston into caliper bore pushing it past the piston seal until it bottoms in the caliper bore (Fig. 34).
5. Position the dust boot into the counterbore of the caliper assembly piston bore.
Fig. 35 Installing Dust Boot
6. Using a hammer and Installer, Special Tool C-4689 or C-4842 (depending on piston size), and Handle, Special Tool C-4171, drive the boot into
the counterbore of the caliper as necessary (Fig. 35).
7. Reinstall the caliper on the vehicle and bleed the brakes as necessary.
INSTALLATION (CONTINENTAL TEVES BRAKES)
CAUTION: TRW and Continental Teves brake calipers are not interchangeable. Each caliper is specifically designed for the unique brake system. If
calipers are interchanged, improper performance, noise and increased stopping distance can occur.