Town & Country V6-3.8L VIN L (2006)
brake fluid level switch can be replaced separately.
CAUTION: Do not hone the bore of the cylinder as this will remove the anodized surface from the bore.
DESCRIPTION - RHD
Fig. 46 RHD MASTER CYLINDER AND POWER BRAKE BOOSTER
The master cylinder used on right hand drive (RHD) vehicles functions similarly to that used on left hand drive (LHD) vehicles. The RHD master
cylinder, as well as the RHD power brake booster, is located in the same area, but lower in the engine compartment than LHD models (Fig. 46). For
that reason an extension manifold is placed between the fluid reservoir and master cylinder housing allowing the fluid reservoir to be positioned in the
same location as on LHD models.
OPERATION
When the brake pedal is depressed, the master cylinder primary and secondary pistons apply brake pressure through the chassis tubes to the brakes at
each tire and wheel assembly.
The master cylinder primary outlet port supplies hydraulic pressure to the right front and left rear brakes. The secondary outlet port supplies hydraulic
pressure to the left front and right rear brakes.