Town & Country V6-3.8L VIN L (2006)
Fig. 102 Front Park Brake Cable At Floor Pan
8. Lift floor mat for access to park brake cable and floor pan. Pull the seal and the park brake cable (Fig. 102) out of the floor pan of vehicle.
9. Pull parking brake cable strand end forward and disconnect button from clevis. Tap cable housing end fitting out of pedal assembly bracket.
10. Remove cable retainer from the parking brake lever (pedal) assembly bracket.
11. Pull front parking brake cable assembly out of vehicle through hole in floor pan.
REMOVAL - FOLD - IN - FLOOR SEATING
1. Release the parking brake.
2. Raise and support the vehicle.
3. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly.
Fig. 103 Parking Brake Cable Equalizer
4. Remove the front cable from the equalizer (Fig. 103).
5. Remove the locking pliers from the cable that were installed during Step 3.