Town & Country V6-3.8L VIN L (2006)
Vacuum Brake Booster: Description and Operation
POWER BRAKE BOOSTER
DESCRIPTION
Fig. 64 Power Brake Booster (Typical)
The power brake booster mounts on the engine compartment side of the dash panel. It is connected to the brake pedal by the input (push) rod (Fig.
64). The master cylinder is bolted to the front of the booster. A vacuum line connects the power brake booster to the intake manifold.
All Left-Hand-Drive (LHD) vehicles use a 270 mm single diaphragm vacuum power brake booster. All Right-Hand-Drive (RHD) vehicles use a
225/200 mm tandem diaphragm vacuum power brake booster.
Fig. 65 MASTER CYLINDER AND BOOSTER
Vehicles equipped with Disc/Disc brakes use a different power brake booster than vehicles equipped with Disc/Drum brakes. Differences between the