Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-1587001.png)
Traction Control Switch: Testing and Inspection
TRACTION CONTROL SWITCH
1. Remove lower steering column shroud.
Fig. 5 Traction Control Wiring Connection
2. Disconnect traction control switch harness from column harness (Fig. 5).
3. Using an ohmmeter, check for continuity between pins 1 and 2. With the switch actuated, there should be continuity between the two pins. With
the switch off, there should be no continuity.