Town & Country V6-3.8L VIN L (2006)
1.
Remove and discard the top left adapter bolt from the oil pressure filter adapter (6) (Fig. 1).
2.
Install the new filter adapter bolt (p/n 06101793) and tighten to 28 N.m (250 in. lbs.) (Fig. 1).
3.
Connect the DRBIII(R) and erase any DTC's in the PCM.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.