Town & Country V6-3.8L VIN L (2006)
Valve Guide Seal: Service and Repair
VALVE STEM SEALS
REMOVAL
1. Remove the valve springs. (Refer to ENGINE/CYLINDER HEAD/VALVE SPRINGS REMOVAL)
2. Remove the valve stem seal (Fig. 28).
INSTALLATION
1. Install the valve stem seal squarely over the valve guide, using the valve stem as a guide (Fig. 28). Do not force the seal against top of the valve
guide.
2. Install the valve spring. (Refer to - ENGINE/ CYLINDER HEADVALVE SPRINGS - INSTALLATION).