Town & Country V6-3.8L VIN L (2006)
Center Air Outlets
3. If the vehicle is equipped with the automatic temperature control (ATC) heating-A/C system, disconnect the infrared temperature sensor jumper
harness from the infrared temperature sensor located at the bottom of the middle outlet.
4. Remove the three screws that secure the bottom of the center bezel outlet housing to the center bezel and disengage the retaining tabs at the top of
the housing.
5. Remove the center bezel outlets and housing from the center bezel as an assembly.
INSTALLATION
1. Position the center bezel outlets and housing assembly onto the back of the instrument panel center bezel and engage the retaining tabs to the top
of the bezel.
2. Install the bottom of the outlet housing to the center bezel and install the three retaining screws. Tighten the screws to 2 N.m (17 in. lbs.).
3. If the vehicle is equipped with the ATC heating-A/C system, connect the infrared temperature sensor jumper harness to the infrared temperature
sensor located at the bottom of the center outlet.
4. Install the center bezel onto the instrument panel.
5. Reconnect the battery negative cable.
Instrument Panel Outlets
REMOVAL
Instrument Panel Outlet Left Side Shown
1. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the outer perimeter of the instrument panel outlet to the
instrument panel top pad and remove the outlet.