Town & Country V6-3.8L VIN L (2006)
Cabin Heater Air Intake And Heater Pipe SWB Shown, LWB Similar
5. Remove the two retaining screws and remove pipe assembly.
INSTALLATION
1. Install the air intake pipe assembly and install the two retaining screws. Tighten the screws to 7 N.m (62 in. lbs.).
2. Attach the steel tube to the flexible tube and position and then tighten the retaining clamp securely.
3. Install the flexible tube to the cabin heater air intake muffler and install and tighten the retaining clamp securely.
4. Install the cabin heater tubes to the lower heater connection and the lower EGR cooler connection and tighten the retaining clamps.
5. Lower the vehicle.
6. Refill the engine cooling system.
7. Verify function of the heater unit.
Exhaust Tube
REMOVAL
WARNING: THERE IS A POTENTIAL DANGER OF SKIN BURNS AS THE SUPPLEMENTAL CABIN HEATER AND ITS
COMPONENTS MAY BE VERY HOT. MAKE SURE THE CABIN HEATER IS ALLOWED TO COOL DOWN BEFORE ANY SERVICE
WORK ON THE CABIN HEATER SYSTEM IS ATTEMPTED.
1. Raise and support the vehicle. Take note of the location of the flexible section of the cabin heater exhaust tube.