Town & Country V6-3.8L VIN L (2006)
Blower Motor Relay: Service and Repair
Rear
REMOVAL
1. Disconnect and isolate the negative battery cable.
Rear Blower Motor Relay
2. Remove the cover from the integrated power module (IPM).
NOTE: Refer to the fuse and relay map on the IPM cover for rear blower motor relay location.
3. Remove the rear blower motor relay from the IPM.
INSTALLATION
NOTE: Refer to the fuse and relay map on the cover of the integrated power module (IPM) for rear blower motor relay location.
1. Position the rear blower motor relay to the proper receptacle in the IPM.
2. Align the rear blower motor relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals
are fully seated.
3. Install the cover onto the IPM.
4. Reconnect the negative battery cable.