Town & Country V6-3.8L VIN L (2006)
Evaporator Temperature Sensor / Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the instrument panel from the vehicle.
Evaporator Temperature Sensor RS Models
3. Disconnect the wire harness connector from the evaporator temperature sensor located on the top of the HVAC housing.
4. Remove the evaporator temperature sensor from the HVAC housing.
INSTALLATION
1. Install the evaporator temperature sensor into the top of the HVAC housing.
2. Connect the wire harness connector to the evaporator temperature sensor.
3. Install the instrument panel.
4. Reconnect the negative battery cable.