Town & Country V6-3.8L VIN L (2006)
Headlamp Bulb: Service and Repair
Removal
REMOVAL
DODGE
1. Disconnect and isolate the battery negative cable.
2. Remove headlamp unit retaining screws.
3. Remove headlamp unit to expose back of unit.
4. Remove wiring connector from bulb.
5. Rotate headlamp bulb retaining ring counter-clockwise.
Figure 1 HEADLAMP - DODGE
6. Pull headlamp bulb and remove from headlamp unit (Figure 1).
CHRYSLER
1. Disconnect and isolate the battery negative cable.
2. Remove headlamp unit retaining screws.
3. Remove headlamp unit to expose back of unit.
4. Remove wiring connector from bulb by sliding red latch lock rearward and then depressing release tab.
5. Rotate headlamp bulb retaining ring counter-clockwise.