Town & Country V6-3.8L VIN L (2006)
Part 2
Certain mechanical problems within the clutch assemblies (broken return springs, out of position snap rings, excessive clutch pack clearance, improper
assembly, etc.) can cause inadequate or out-of-range clutch volumes. Also, defective Input/Output Speed Sensors and wiring can cause these conditions.
The following chart identifies the appropriate clutch volumes and when they are monitored/updated:
SHIFT SCHEDULES
As mentioned earlier, the PCM has programming that allows it to select a variety of shift schedules. Shift schedule selection is dependent on the
following:
-
Shift lever position
-
Throttle position
-
Engine load
-
Fluid temperature
-
Software level
Part 1