Town & Country V6-3.8L VIN L (2006)
Transmission Control Module is part of the Powertrain Control Module.
Diagnostic procedures and DTC numbers are some of the changes you will see which reflect the new combined module technology. The PCM will have
four color coded connectors C1 through C4, (C1-BLK, C2-ORANGE, C3-WHITE, C4-GREEN), each PCM connector will have 38 pins each. Two new
tools are used for probing and repairing the New PCM connectors. A New tool to release the pins from the PCM connectors Miller #3638 is introduced,
you must use the Miller tool #3638 to release the connector pins or harness and connector damage will occur. Also a New tool for probing connectors
Miller #8815 is introduced, you must use the Miller tool #8815 to probe the PCM pins or harness and connector damage will occur. There is also a new
Verification test and module replacement procedure for the PCM.