Town & Country V6-3.8L VIN L (2006)
Throttle Body: Service and Repair
REMOVAL
1. Disconnect negative cable from battery cable.
2. Remove air inlet to throttle body hose clamp.
3. Remove throttle and the speed control (if equipped) cables from lever and bracket.
IAC Valve 2.4L
IAC Valve Location 3.3/3.8L
4. Disconnect electrical connectors from the idle air control motor and throttle position sensor (TPS).
5. Remove throttle body to intake manifold attaching bolts.
6. Remove throttle body and gasket.
INSTALLATION
1. Install a new gasket, if required.
2. Install throttle body.
3. Tighten throttle body mounting bolts. The 2.4L to 28.2 N.m (250 ± 50 in. lbs.) torque, The 3.3/3.8L to 11.6 N.m (105 ± 20 in. lbs.) torque.
4. Connect electrical connectors to the idle air control motor and throttle position sensor (TPS).
5. Install air inlet to throttle body hose clamp and tighten.
6. Connect negative cable to battery cable.