Town & Country V6-3.8L VIN L (2006)
Seat Belt: Procedures
Seat Belt and Retractor Outboard-Front
REMOVAL
1. Open door.
2. Move seat all the way forward.
3. Open hood.
4. Disconnect and isolate the battery negative cable.
WARNING: WAIT TWO MINUTES FOR THE AIRBAG SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE
BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT, PERSONAL INJURY OR DEATH.
Seat Belt Outboard Front
5. Remove shoulder harness height adjuster knob by pulling it straight away from adjuster.
6. Remove cover from seat belt turning loop.
7. Remove bolt attaching turning loop to shoulder belt height adjuster.
8. Remove upper B-pillar trim cover.
NOTE: If equipped with the Occupant Classification System (OCS), there is a Belt Tension Sensor located on the lower seat belt anchor on the
passenger front seat belt.