Town & Country V6-3.8L VIN L (2006)
Seat Belt Height Adjuster: Service and Repair
Seat Belt Height Adjuster Knob
REMOVAL
1. Disengage clips attaching clam shell cover to seat belt turning loop and open cover.
2. Using a trim tool (special tool #C-4755), gently pry knob from seat belt height adjuster.
INSTALLATION
1. Place seat belt height adjuster knob in position on height adjuster.
2. Firmly push knob on until retainers engage.
3. Reinstall turning loop clam shell cover.
4. Verify seat belt operation. Make sure it moves through loop without binding.