Town & Country V6-3.8L VIN L (2006)
Seat Belt Retractor: Service and Repair
Second Row
Seat Belt & Retractor-Second Row-Left Outboard
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper anchor bolt.
4. Remove liftgate sill plate.
5. Remove upper liftgate trim.
6. Remove second seat belt lower anchor bolt.
7. Remove second seat belt upper anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in
the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.
13. Remove retractor retaining bolt.
14. Remove second row seat belt and retractor from vehicle.
INSTALLATION
1. Install second row seat belt and retractor. Torque bolt to 39 N.m (29 ft. lbs.).
2. Install quarter trim panel.
3. Install quarter trim panel screws.
4. Install quarter trim bolster.
5. Connect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in the
rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
6. Install D-pillar trim cover.
7. Install second seat belt lower anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
8. Install second seat belt upper turning loop anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
9. Install upper liftgate trim.
10. Install liftgate sill plate.
11. Install first row seat belt upper turning loop anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
12. Install first row seat belt lower anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).
13. Install first and second row seats.
Seat Belt & Retractor-Second Row-Right Outboard
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper anchor bolt.
4. Remove liftgate sill plate.
5. Remove upper liftgate trim.
6. Remove second seat belt lower anchor bolt.
7. Remove second seat belt upper anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in
the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.
13. Remove retractor retaining bolt.
14. Remove second row seat belt and retractor.
INSTALLATION
1. Install second row seat belt and retractor. Torque bolt to 39 N.m (29 ft. lbs.).
2. Install quarter trim panel.
3. Install quarter trim panel screws.
4. Install quarter trim bolster.
5. Connect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in the
rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
6. Install D-pillar trim cover.
7. Install second seat belt lower anchor bolt. Torque bolt to 39 N.m (29 ft. lbs.).