Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-1790001.png)
Ball Joint: Service and Repair
Removal
LOWER BALL JOINT SEAL BOOT
REMOVAL
1) Remove steering knuckle from vehicle.
Fig. 17 Ball Joint Seal Boot Removal
2) Using a screwdriver or other suitable tool, pry seal boot off of ball joint (Fig. 17).
3) Inspect ball joint for evidence of dirt or water intrusion and wipe clean as necessary. If dirt or water intrusion is extreme and joint cannot be
properly cleaned, lower control arm will need to be replaced.