Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-1795001.png)
Control Arm: Service and Repair
Disassembly - Rear Bushing - Hydro
DISASSEMBLY - REAR BUSHING - HYDRO
1) Remove the lower control arm from the front suspension cradle.
2) Mount the lower control arm in a vise without using excessive clamping force.
Fig. 24 HYDRO-BUSHING REMOVAL
3) Install Remover, Special Tool 8460, on hydro-bushing as shown (Fig. 24). Removal Pin, Special Tool 8460-3, must extend though hole in center
of bushing rear.
4) Tighten forcing screw of Bridge (Special Tool 8460-1), removing bushing from lower control arm.