Town & Country V6-3.8L VIN L (2006)
Fig. 3 STRAIGHTENED RETAINING TABS
7) Straighten the retainer tabs on the bushing (Fig. 3).
Fig. 4 Tool 8459 Mounted For Bushing Removal
8) Place Remover/Installer, Special Tool 8459 on leaf spring and bushing as shown (Fig. 4) and tighten Set Screw securing Remover Plate to tool
threaded shaft.
9) Tighten nut (Fig. 4), removing bushing from spring eye.
10) Remove the tool from spring, then remove bushing from tool.
INSTALLATION
1) Install by hand NEW bushing in left side of leaf spring eye.