Town & Country V6-3.8L VIN L (2006)
4. Inspect speed sensor o-ring (Fig. 286) and replace if necessary.
INSTALLATION
1. Verify o-ring is installed into position (Fig. 286).
2. Install and tighten input speed sensor to 27 Nm (20 ft. lbs.) (Fig. 285).
3. Connect speed sensor connector (Fig. 284).
4. Connect battery negative cable.
Output Speed Sensor
SPEED SENSOR OUTPUT
REMOVAL
1. Disconnect battery negative cable.
2. Raise vehicle on hoist.
3. Disconnect output speed sensor connector (Fig. 290).