Town & Country V6-3.8L VIN L (2006)
Transmission Temperature Sensor/Switch: Service and Repair
TRANSMISSION RANGE SENSOR
REMOVAL
1) Remove valve body assembly from transaxle.
Fig. 338 Remove Transmission Range Sensor
2) Remove transmission range sensor retaining screw (3) (Fig. 338) and remove sensor (1) from valve body.
3) Remove TRS (1) from manual shaft.
INSTALLATION
Fig. 339 Remove Transmission Range Sensor
1) Install transmission range sensor (TRS) (1) (Fig. 339) to the valve body and torque retaining screw (3) to 5 Nm (45 inch lbs.).
2) Install valve body to transaxle.