Town & Country V6-3.8L VIN L (2006)
Fig. 30 Outer C/V Joint Installation onInterconnecting Shaft
3) Install outer CV joint assembly onto interconnecting shaft by using a soft-faced hammer (1) (Fig. 30) and tapping end of stub axle (2) (with hub
nut (4) installed) until outer CV joint (3) is fully seated on interconnecting shaft.
Fig. 31 Outer CV Joint Correctly Installed onInterconnecting Shaft
4) Outer CV joint assembly must be installed on interconnecting shaft until cross (2) (Fig. 31) of outer CV joint assembly (3) is seated against circlip
on interconnecting shaft (1).