Town & Country V6-3.8L VIN L (2006)
![background image](/chrysler/town_&_country/v6-3.8l_vin_l/Page-2897002.png)
2.
Clean the appropriate weatherstrip with isopropyl alcohol in the area shown in (Fig. 1)
3.
Locate a number of small holes in the rearward portion of the weatherstrip (Fig. 1). Apply a very small amount of RTV sealer on the tip of your
finger, and fill each hole in the weatherstrip that you can feel (Fig. 1).
NOTE:
Be careful to remove any excess RTV from the weatherstrip.
NOTE:
Allow the RTV sealer to dry for 30 minutes before closing the quarter window.
4.
Repeat Step # 1 through Step # 3. on the other side of the vehicle.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
FAILURE CODE
DISCLAIMER
This bulletin is supplied as technical information only and is not as authorization for repair.