Town & Country V6-3.8L VIN L (2006)
Windshield Washer Hose: Service and Repair
REMOVAL
1. Remove washer reservoir from vehicle.
2. Disconnect washer hose front the reservoir cavity.
3. Disconnect the washer hose from the reservoir pump.
4. Remove parts as necessary to replace washer hose (engine compartment, interior components, etc.).
INSTALLATION
1. Install parts as necessary to after replacing washer hose (engine compartment, interior components, etc.).
2. Connect the washer hose to the reservoir pump.
3. Connect washer hose to the reservoir cavity.
4. Install the washer reservoir into vehicle.