Town & Country V6-4.0L (2008)
Remote Switch: Service and Repair
Installation
INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO ELECTRICAL, RESTRAINTS BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Install remote radio switch to the steering wheel.
2. Install three screws securing steering wheel rear cover.
3. Connect the wire harness to the remote radio switch.
4. Install the steering wheel.See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation.
5. Install the driver side airbag.See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Airbag -
Installation.
6. Connect the battery negative cable.
