Town & Country AWD V6-3.8L VIN L (2003)
Fig. 42
8. Lift rear tub carpet insert out of floor well (Fig. 42).
9. Remove tub insert from vehicle
INSTALLATION
1. Place rear tub carpet insert into position on weld studs (Fig. 42).
2. Slip carpet edges under quarter trim panel.
3. Install nuts attaching third row seat lower trim cover (Fig. 41). Follow the tightening sequence.
4. Fold third row seats in to floor well.
5. Install two screws attaching front edge of floor tub carpet.
6. Place anchor molding into position push on clips to lock (Fig. 40).
7. Remove liftgate sill plate.
8. Close liftgate.