Town & Country AWD V6-3.8L VIN L (2003)
INSTALLATION
1. Position foot on A-pillar trim panel into instrument panel top cover channel.
2. Position A-pillar trim in vehicle.
3. Align locator pins.
4. Engage hidden clips.
5. Install the assist handle, if equipped.
A-Pillar Lower Extension Trim
A - PILLAR LOWER EXTENSION TRIM
REMOVAL
1. Remove instrument panel side cover.
Fig. 1
2. Remove A-pillar extension trim from vehicle by disengaging hidden clips (Fig. 1).
INSTALLATION
1. Place A-pillar extension trim in position on vehicle (Fig. 1).
2. Install instrument panel side cover.
B-Pillar Lower Trim
B - PILLAR LOWER TRIM
REMOVAL
NOTE: The driver's side a double ended stud is used. A nut has to be removed for the seat belt anchor removal and the stud for the retractor removal.
NOTE: On the passenger side there is a belt tension sensor.
1. Slide lower seat belt cover rearward to expose anchor fastener.
2. Remove bolt/nut attaching lower seat belt anchor to floor.
3. Remove upper B-pillar trim cover.