Town & Country AWD V6-3.8L VIN L (2003)
Condenser HVAC: Description and Operation
The condenser is integral to a cooling module which includes the radiator, the electric cooling fan, the fan shroud, air seals and an automatic transmission
oil cooler. The cooling module is located in the air flow in the front of the engine compartment behind the radiator grille. The condenser cannot be
repaired or adjusted and, if faulty or damaged, it must be replaced. The condenser may be removed from the cooling module for service without
removing the cooling module from the vehicle.
The condenser is a heat exchanger that allows the high-pressure refrigerant gas being discharged by the compressor to give up its heat to the air passing
over the condenser fins. When the refrigerant gas gives up its heat, it condenses. When the refrigerant leaves the condenser, it has become a
high-pressure liquid refrigerant. The volume of air flowing over the condenser fins is critical to the proper cooling performance of the air conditioning
system. Therefore, it is important that there are no objects placed in front of the radiator grille openings in the front of the vehicle or foreign material on
the condenser fins that might obstruct air flow. Also, any factory-installed air seals or shrouds must be properly reinstalled following radiator or
condenser service.
