Town & Country AWD V6-3.8L VIN L (2003)
g.
If the vehicle is not equipped with SKIM proceed to step 18h. If the vehicle is equipped with SKIM follow the directions on the DRBIII(R).
When the VIN and SKIM key has been programmed, proceed to step 19.
h.
Enter the VIN as requested by the DRBIII(R).
19.
Update the PCM mileage. Using the DRBIII(R)select:
a.
"DRBIII(R) Standalone"
b.
"1998 - 2004 Diagnostics"
c.
"All (Except Below)"
d.
"Engine"
e.
"Miscellaneous"
f.
"Check PCM Odometer"
g.
"NO"
h.
Enter the current odometer mileage and then press "Enter".
I.
Cycle the ignition key to the OFF position and back to the ON position and then press "Enter".
20.
Proceed as follows:
a.
If the vehicle is equipped with an automatic transmission, proceed to step 22.
b.
If the vehicle is equipped with a non-turbo engine and manual transmission, it is not necessary to set the pinion factor. Proceed to step 23.
c.
If the vehicle is equipped with a Turbo engine and manual transmission, proceed to step 21.
21.
On vehicles equipped with a Turbo engine and manual transmission, set the Pinion Factor. Using the DRBIII(R) select:
a.
"DRBIII(R) Standalone"
b.
"1998 - 2004 Diagnostics"
c.
"All (Except Below)"
d.
"Engine"
e.
"Miscellaneous"
f.
"Pinion Factor"
g.
Select the correct tire size and then select "Page Back" to exit.
h.
Proceed to step 24.
22.
On vehicles equipped with an automatic transmission, set the Pinion Factor. Using the DRBIII(R) select:
a.
"DRBIII(R) Standalone"
b.
"1998 - 2004 Diagnostics"
c.
"All (Except Below)"
d.
"Transmission"
e.
"Transmission Module"
f.
"Miscellaneous"
