Town & Country AWD V6-3.8L VIN L (2003)
Fig.6 Decoupler Removal (Litens)
8. Use Special Tool # 8433 (Fig. 7) to loosen the Generator Decoupler (Fig. 6).
9. Remove the tool.
10. Remove the Generator Decoupler.
INSTALLATION
1. Install the Generator Decoupler to the generator shaft.
Fig.8 Decoupler Installation (Litens)
2. Use Special Tool # 8433 (Fig. 7) to tighten the Generator Decoupler (Fig. 8). Refer to the torque chart for the proper torque.
3. Install the Air Box, refer to the Engine section for more information.
4. Raise vehicle and support.
5. Install accessory drive belt, refer to the Cooling System section for proper procedures (Fig. 5).
6. Install the right front lower splash shield.
7. Lower vehicle.
8. Connect battery negative cable.
