Town & Country AWD V6-3.8L VIN L (2003)
Fluid - Transfer Case: Service and Repair
Fluid Level Inspection
STANDARD PROCEDURE - FLUID LEVEL INSPECTION
1. Raise vehicle on hoist.
2. Remove PTU inspection plug (Fig. 6).
3. Fluid level should be within 3/16" from bottom of inspection hole. Add Mopar Gear and Axle Lubricant 80W-90 as necessary with suitable
suction gun (Fig. 7).
4. Install inspection plug and torque to 20 Nm (180 inch lbs.) torque.
5. Lower vehicle.