Town & Country LWB AWD V6-3.8L VIN L (2000)
Leak Detection Pump: Service and Repair
REMOVAL
Fig. 9 Leak Detection Pump
The Leak Detection Pump (LDP) is located under the driver's side in the cast cradle under the steering gear.
1. Raise and support vehicle on a hoist.
Fig. 10 Leak Detection Pump Connector Lock
2. Push locking tab on connector to unlock.
3. Push down on connector latch and pull connector from pump.
4. Remove hoses.
5. Remove bolts holding LDP and bracket to cradle.
6. Remove bracket from LDP.
INSTALLATION
