Town & Country LWB FWD V6-3.3L VIN G Flex Fuel (1999)
17.
Torque the cylinder head to intake manifold strut bolts to 54 Nm (40 ft. lbs.).
18.
Connect ground strap and MAP sensor electrical connectors.
19.
Connect vacuum harness to intake plenum.
20.
Using a new gasket, connect the EGR tube flange to the intake manifold and torque to 22 Nm (200 inch lbs.).
21.
Clip wiring harness into the hole in the throttle cable bracket.
22.
Connect the wiring connectors to the Throttle Position Sensor (TPS) and Automatic Idle Speed (AIS) motor.
23.
Connect vacuum harness to throttle body.
