Removal and Installation of Drive Belt for Town & Country SWB FWD V6-33L Flex Fuel
3. Release belt tension by rotating the tensioner clockwise (Fig. 53).
4. Remove drive belt.
INSTALLATION
1. Properly route and position belt onto all pulleys, except for the tensioner pulley (Fig. 53).
2. Rotate belt tensioner clockwise until belt can be installed onto the tensioner pulley (Fig. 53). Slowly release belt tensioner.
3. Verify belt is properly routed and engaged on all pulleys.
4. Install splash shield (Fig. 52) and lower vehicle.