Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Intake Manifold: Specifications
Intake Manifold Torque Specifications
LOWER INTAKE MANIFOLD
1. Tighten intake manifold end seal retainer screws to 12 Nm (105 in. lbs.).
2. Torque lower intake manifold bolts and to 1 Nm (10 in. lbs.). Then torque bolts to 22 Nm (200 in. lbs.) in sequence shown. Then torque again to
22 Nm (200 in. lbs.).