Town & Country Van V6-201 3.3L VIN R SMFI (1990)
Figure 1
Vehicles not equipped with Bendix Anti-Lock Brake System --
Install the supplied bracket on the valve (with the bracket mounting holes toward the front as shown in Figure 1). Loosely attach the bracket to
the left front frame rail with the supplied screw, using the existing hole in the rail.
Figure 2
Figure 3
^
Vehicles equipped with Bendix Anti-Lock Brake System (ABS) --
There is an existing cooler line clip at the ABS controller module mounted to the left front frame rail (Figure 2). Use this existing
clip to support the valve and hose assembly as shown in Figure 3.